How to Reset Fitbit Flex, Alta, Blaze, and Surge? - Norton Setup

Fitbit plays a very significant role in our daily life. For instance, it gets synchronized with the smartphone, tracks activities that are done by you, quickly responds to inputs, etc. Sometimes, these functions don’t work correctly. To make it work, a reset is very helpful. The method of resetting a Fitbit varies from gadget to gadget.

Best ways to reset a Fitbit

The method of resetting ‘Fitbit Flex as well as Fitbit Flex 2’

Things required

• A paperclip
• A flex charger
• PC
• USB port
• Firstly, switch on the computer.
• Then, change the shape of the paper clip by making it of S shape with the help of bending it
• Next, take out the pebble from the device of Fitbit.
• After that, put the pebble into the charging cable.
• You require to connect the Flex charger to the computer’s USB port.
• Then, look for a hole in the pebble.
• Try to fit in the paperclip over there, and have a long press for few seconds.
• After that, take out the paperclip.
• Lastly, it will glow and reset process will start.

The method of resetting Fitbit Alta and Alta HR

Things required

• Fitbit gadget
• A charging cable
• A working USB port
• Firstly, connect the charging cable to the Fitbit.
• After that, attach this to a working USB port.
• Then, long press the button on the Fitbit for a few seconds.
• Note that before that button goes away, you need to take out the Fitbit from the charger.
• Remember that you need to continue pressing that button for a minimum of 7 seconds.
• After the button goes away, you need to do a long press one more time.
• After you have a look at ALT and a screen flash, wait for the button to go away.
• Tap on the button one more time.
• Observe that vibration will take place. After that let the button go.
• Tap on the button one more time.
• Whenever the word Error gets displayed in front of you, let the button go.
• Tap on the button one more time.
• Whenever the word Erase gets displayed before you, let the button go.
• Note that the Fitbit will get switched off.
• Lastly, switch on the Fitbit.
  
  
  

The method of resetting a ‘Fitbit Blaze or Fitbit Surge’

1. Firstly, visit the Fitbit website and sign in.
2. Fitbit Official Site for Activity Trackers & More
3. Then, you need to have a look at the Dashboard.
4. After that, press on the gadget that you would prefer to take out.
5. Next, move downwards to the end of the page.
6. Press on ‘Remove This Fitbit (Blaze or Surge) From Your Account.’
7. Hit OK.
8. After that, visit your smartphone’s Settings.
9. Press on Bluetooth.
10. Then, locate your device.
11. Press on it.
12. Lastly, select the forget the device option.

Harry Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

More info: norton setup, norton.com/setup, www.norton.com/setup

Everything to Know About Microsoft Windows 10 in Safe Mode - Norton Setup

Microsoft Windows 10’s  S mode is safe for its users. It can be termed safe because it supports the device to only install applications from the MS Store. This implies that it is safer than the Windows 10 Operating System.

Earlier, this brand was called as Windows10 S but recently in the year 2018 it was renamed as S mode.

Know about Microsoft Windows 10’s S mode

Want to know about the limitations for Windows 10 in S Mode?

The applications will be downloaded from the MS Store application store only.

Microsoft Edge will be the set internet browser.

Bing will be set as the search engine.

Want to know about the upsides of  Windows 10 in S Mode?

As it supports the device to only install applications from the MS Store, it results in the safety of the device. The system gets saved from the viruses that enter from the application which are installed from the websites. So in simple words, it protects your device from getting harmed.

As it supports the device to only install applications from the MS Store application store results in not letting many background programs from working and making it inefficient.

How can I get to know that Windows 10 in S mode is working on my system?

Go through the following steps to know whether Windows 10 in S mode working on your system or not.

Firstly, go to the Windows 10 Action Center.

Then, choose All settings.

Next, tap on System.

After that, from the menu tap on About.

Lastly, look for Windows specifications title, below this will be the option of Edition, near to that if it has been written over there that’ Windows 10 Home in S mode’ or ‘Windows 10 Pro in S mode’, then this implies that S mode has been downloaded on your system and it’s presently working as well.

How to search for purchased applications on Windows 10 in S mode?

In the MS Store, choose the ‘ellipsis’ which will be located at the corner of it.

Then, click on Downloads and Updates to watch all of your installed and updated applications.

Lastly, you must click on the application about which you want to know more in a bit detail.

Hope this blog gave you some idea about the Windows 10 S mode.

Stephen Strange is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

More info: norton setup, norton.com/setup, www.norton.com/setup

How to Reset Fitbit Flex, Alta, Blaze, and Surge? - Norton Setup

Fitbit plays a very significant role in our daily life. For instance, it gets synchronized with the smartphone, tracks activities that are done by you, quickly responds to inputs, etc. Sometimes, these functions don’t work correctly. To make it work, a reset is very helpful. The method of resetting a Fitbit varies from gadget to gadget.
Best ways to reset a Fitbit
The method of resetting ‘Fitbit Flex as well as Fitbit Flex 2’

Things required

• A paperclip
• A flex charger
• PC
• USB port
• Firstly, switch on the computer.
• Then, change the shape of the paper clip by making it of S shape with the help of bending it
• Next, take out the pebble from the device of Fitbit.
• After that, put the pebble into the charging cable.
• You require to connect the Flex charger to the computer’s USB port.
• Then, look for a hole in the pebble.
• Try to fit in the paperclip over there, and have a long press for few seconds.
• After that, take out the paperclip.
• Lastly, it will glow and reset process will start.

The method of resetting Fitbit Alta and Alta HR
Things required

• Fitbit gadget
• A charging cable
• A working USB port
• Firstly, connect the charging cable to the Fitbit.
• After that, attach this to a working USB port.
• Then, long press the button on the Fitbit for a few seconds.
• Note that before that button goes away, you need to take out the Fitbit from the charger.
• Remember that you need to continue pressing that button for a minimum of 7 seconds.
• After the button goes away, you need to do a long press one more time.
• After you have a look at ALT and a screen flash, wait for the button to go away.
• Tap on the button one more time.
• Observe that vibration will take place. After that let the button go.
• Tap on the button one more time.
• Whenever the word Error gets displayed in front of you, let the button go.
• Tap on the button one more time.
• Whenever the word Erase gets displayed before you, let the button go.
• Note that the Fitbit will get switched off.
• Lastly, switch on the Fitbit.
  

The method of resetting a ‘Fitbit Blaze or Fitbit Surge’

1. Firstly, visit the Fitbit website and sign in.
2. Fitbit Official Site for Activity Trackers & More
3. Then, you need to have a look at the Dashboard.
4. After that, press on the gadget that you would prefer to take out.
5. Next, move downwards to the end of the page.
6. Press on ‘Remove This Fitbit (Blaze or Surge) From Your Account.’
7. Hit OK.
8. After that, visit your smartphone’s Settings.
9. Press on Bluetooth.
10. Then, locate your device.
11. Press on it.
12. Lastly, select the forget the device option.

Harry Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

more info: norton enter product key, norton setup, norton.com Setup, norton.com/setup, www.norton.com/setup

How to Arrange Applications on the iPad - Norton Setup

You should systematically keep your applications, as it helps you find your favorite application easily. You can put similar applications in one folder and other applications in a different folder. You can give a name to both the folders.

Arranging your applications will make your iPad to look clean. All the essential or daily use applications should be kept in the front screen of your iPad.

Uninstall the un-necessary applications from your phone to get more space to install your new applications from the App Store. Necessary applications like clock, calendar, messaging app, setting, albums and many more, should be on the front screen to use in an emergency.

How to Arrange the iPad with Folders?

Earlier there are no options for making folders for apps, but now you can easily make a folder to keep the applications in well organized. In case you don’t know how to create a folder, then you should follow the given steps:

•    Click and long press on that application which you wish to place in the folder.

•    Press on another application which you wish to put it in the above folder.

•    Press the application, and you can zoom in and out by going to the folder.

•    Give a title to the folder by clicking on the renaming option. In case you make a folder by putting the two applications in the weather folder, then the folder title remains the same.

•    Press the folder and come back on the Home display. Place all the extra applications in the one folder.

Create many files to place all the applications. Make different files for online shopping, gaming, official application of Amazon, Poshmark, etc., entertaining applications and many more. Pull out the entire applications from the Home display, and then that file will not appear on the home display.

How to Put Recently Used Applications on the iPad Dock?

You will find applications on the iPad Dock at the end of the display, and it will remain the same whatever home display you are using. You can put many applications on the iPad dock at one time, and there are limited folders to the apps on the iPad dock.

Only three applications will appear on the iPad dock which is used recently, in case you don’t have applications on the iPad dock, steps for putting the applications on the dock are:

•    Click and long press on the application.

•    Touch the screen with your finger and the application to the iPad dock and long pressing on the additional applications until it drags out from the home display.

•    Stop pressing the screen.

In case there is no space in the iPad dock or in case you want to place the most used applications on the iPad dock, then drag out the applications. After dragging out the applications from the iPad dock, the additional applications will move there automatically.

Aida Martin is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup .

More info: norton setup, norton.com/setup, www.norton.com/setup

Apex Legends: According to the Respawn Ceo, New Maps Could Be Included to the Title - Norton Setup

Apex Legends has made an impactful entry, and within a span of a week, it crossed 10 million mark of in-game players. This free to play battle royale shooter title has plenty of content for gamers, and quality optimization makes it much more presentable and user-friendly.

As Vince Zampella, CEO at Respawn has suggested that if the Apex Legends successfully gains similar response as received during the launch and gains enough popularity, then they would include more content including weapons, items, modes and maps for fans to enjoy.

Zampella further said, this is just the beginning of our journey, and there will be a lot more of content which players would experience in the following year and for next ten years, but only if the game receives enough traction amongst the fan of battle royale.

Many pro players would quickly point out that various other games have already included different maps or lactations to indulge players with a variety of options to explore. Apex Legends would not be the first one to include new maps and locations as similar titles like PUBG and Fortnite have already done so.

PUBG has included a total of four maps for players to experience different climatic conditions and different weathers. The four different maps Erangle, Miramar, Sanhok and Vikendi, provides players with changing dynamics, weapons, and landscape for them to have a unique experience with every other map.

Developers at Respawn are slowly analyzing the current game response from the players and trying to resolve any issues in the game as recently the title experienced a connection issue for players.

It is not farfetched to observe the introduction of new locations, characters, and weapons in the future updates but the inclusion of map is something only time can tell. Community members are speculating ways in which Apex Legends would include new content in the game.

Although Fortnite has currently one map available for players to battle on, but it keeps on including new locations for players to explore and accomplish tasks on a single map. Still, it seems like Respawn is going to follow the PUBG model of including new content with every new update.

We will have to wait and observe the progress of Apex Legends, that if it even manages to create a regular user base and active players, as including new content would be useless if there will be no players playing the game.

Hopefully, Apex would manage to sustain itself for coming months, and new players join the game, which would motivate the team of developers and encourage them to develop new content for the game.

Davis Johnson  is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cybersecurity, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup.

Tags:more info: norton enter product key, norton setup, norton setup product key, norton.com my account, norton.com Setup, norton.com/setup, www.norton.com/setup

Top 9 Ways to Fix Apple Watch Not Turning On Issue

Is your Apple Watch is not working at all? Does your Watch fail to turn on? It can happen due to underlying issues. The black display always doesn’t always imply damage. Many of such problems can be rectified quickly. Don’t panic and check out the 9 tricks to make your Apple Watch turn on.

Follow the methods given below to make the Apple Watch work again like it used to.

Make Your Apple Watch Function Smoothly.

1. Reboot Your Smartwatch

Generally, the Watch stops working or the display becomes dark because of the power issue, but it only happens if you were using it throughout the whole day.

In this type of situation, you should conduct a hard reset. Well, this is more convenient because in this busy life waiting for half an hour or more for the smartwatch to get charged will be worthless, if this doesn’t do the trick. The Watch may have been facing this problem because of its software. Or else, you might have accidentally selected a mode that darkened the display. A reboot will make the smartwatch switch off entirely, and then you will be able to switch on your smartwatch. This can solve all the issues except the power one.

● Firstly, hold the side switch which is round in shape and the small button which is situated just underneath the crown.

● Keep holding both of them till the symbol of Apple gets displayed. This means that the Smartwatch is starting again.

● The reboot is done in few seconds but holds both buttons for minimum half a minute before finishing your hard reboot. It is so because in some of the situation it may take half a minute to get done reboot entirely.

2. Charge the Watch

It is worth noting that if your Watch stops working after using it throughout the whole day, then it is the low battery problem. So charging it up is the only solution for it. But if you are facing low battery problem in the mid of the day, then it can be possible that your Smartwatch is not getting charged even when you are putting it on charging.

● Look at the place where you set its charger for charging it up. It can be possible that any plastic is stuck and this obstruction is preventing it from getting it charged.

3. Ensure That Power Reserve Is Switched Off

In Power Reserve, your Apple Watch will only be able to let you know the time. This feature helps your smartwatch to work for more time. No app works in this mode, so smartwatch doesn’t remain smart if this mode is on. So prefer having this mode switched off.

4. Wear Apple Watch Properly

If your Apple Watch is not able to note your activity, then it can be possible that you are not wearing it correctly. It might have become loose. Wear it a bit tight.

5. Update Your Apple Watch

It can be possible that your smartwatch is working very slow. To fix this problem update it.

6. Do The Pairing Again

Some of the times pairings happen but do not work. In such cases, prefer doing unpairing and after that, try to pair once more.

7. Always Clean It

On regular basis prefer cleaning the screen and don’t allow any dust particle to penetrate it.

8. Remove Unnecessary Applications

It can be possible that your smartwatch is not working correctly because there are plenty of applications stored on it. To make your smartwatch work efficiently remove the applications that you don’t use.

9. Avoid Exhaustion Of Battery

The constant exhaustion of battery may influence the Watch’s performance, so try to avoid it as much as possible.

Carl Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Content Source :http://nortoncom-norton.com/blog/2019/02/18/top-9-ways-to-fix-apple-watch-not-turning-on-issue/

How to Prevent Skype from Running Automatically

Sometimes people find Skype to be an annoying application as it appears on the screen when they start the computer. It will come with an option of logging in to the account of Skype so that one can text or call their friends immediately when they wish.

If Skype is always there on your computer and you are getting notifications through Skype each time you open your system, then it slows your system speed. You can prevent the Skype from not appearing on your home screen.

How to log out from Skype?

You can stop the Skype which automatically appears on your screen. It depends on how you download the Skype in the system. Follow the given steps listed below to uninstall the Skype from your system:

Skype Application in Windows 10

In case your operating system is Windows 10 then you can turn off the Skype from the start menu. You can sign out from the Skype application so that you don’t get any notifications from it. Here’s how:

•    Press the profile picture given on the left side of the screen.

•    Press “Log out” located at the end of the screen.

•    Skype application can be deleted automatically from the home display.

Standard Skype application in Windows 10

In case you already install the standard Skype program on your operating system which is Windows 8 or 10, go to the settings app to turn off the Skype.

Follow the given steps to turn off Skype:

•    Press 3 dots button located on the right of the name on the screen.

•    Select the “Settings” app.

•    Open “General” option.

•    Switch “Automatically start Skype” option to disable it.

•    Leave the setting app display.

How to delete Skype on Mac?

You will get many steps to turn off Skype on a Mac operating system. You will use the most straightforward way by doing it from the Dock.

•    Go to the dock to find Skype symbol.

•    Right, click on it.

•    Click “Options”.

•    Tap “Open at Login” option to delete the box.

The additional method to stop Skype from appearing on the home screen on Mac: You can delete it by going to the System Preferences option. This way is more accessible to stop Skype, and in this option, you can also delete the other applications.

Go through the given steps to stop Skype on Mac:

•    Go to the System Preferences option.

•    Press Users and Groups.

•    Tap on the username.

•    Go to the “Login Items” button.

•    Press “Skype.” •    Tap on the delete tab given at the end of the display.

Harry Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Content Source :http://nortoncom-norton.com/blog/2019/02/15/how-to-prevent-skype-from-running-automatically/

How to Prevent Skype from Running Automatically - Norton Setup

Sometimes people find Skype to be an annoying application as it appears on the screen when they start the computer. It will come with an option of logging in to the account of Skype so that one can text or call their friends immediately when they wish.

If Skype is always there on your computer and you are getting notifications through Skype each time you open your system, then it slows your system speed. You can prevent the Skype from not appearing on your home screen.

How to log out from Skype?

You can stop the Skype which automatically appears on your screen. It depends on how you download the Skype in the system. Follow the given steps listed below to uninstall the Skype from your system:

Skype Application in Windows 10

In case your operating system is Windows 10 then you can turn off the Skype from the start menu. You can sign out from the Skype application so that you don’t get any notifications from it. Here’s how:

•    Press the profile picture given on the left side of the screen.

•    Press “Log out” located at the end of the screen.

•    Skype application can be deleted automatically from the home display.

Standard Skype application in Windows 10

In case you already install the standard Skype program on your operating system which is Windows 8 or 10, go to the settings app to turn off the Skype.

Follow the given steps to turn off Skype:

•    Press 3 dots button located on the right of the name on the screen.

•    Select the “Settings” app.

•    Open “General” option.

•    Switch “Automatically start Skype” option to disable it.

•    Leave the setting app display.

How to delete Skype on Mac?

You will get many steps to turn off Skype on a Mac operating system. You will use the most straightforward way by doing it from the Dock.

•    Go to the dock to find Skype symbol.

•    Right, click on it.

•    Click “Options”.

•    Tap “Open at Login” option to delete the box.

The additional method to stop Skype from appearing on the home screen on Mac: You can delete it by going to the System Preferences option. This way is more accessible to stop Skype, and in this option, you can also delete the other applications.

Go through the given steps to stop Skype on Mac:

•    Go to the System Preferences option.

•    Press Users and Groups.

•    Tap on the username.

•    Go to the “Login Items” button.

•    Press “Skype.” •    Tap on the delete tab given at the end of the display.

Harry Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

More info: norton enter product key, norton setup, norton setup product key, norton.com my account, norton.com Setup, norton.com/setup, www.norton.com/setup

How To Disconnect Facebook From Instagram - Norton Setup

Have different posts on separate social network sites

From the time Facebook bought Instagram, both of them got connected in many of the ways. It is true that for Instagram users it is not compulsory to start their Instagram account with Facebook, but it does suggest to do it always. Luckily, there are methods to disconnect Instagram from Facebook.

What can be the reason behind you unlinking Instagram from Facebook?

There can be plenty of reasons behind unlinking Instagram from Facebook.

Some of them are-                                          

You may feel that it is less safe.

It can be possible that you have a lot of friends in your Facebook account starting from your school friends, college friends to official friends. It can be possible to avoid some friends suggestion like official friends you may prefer unlinking Instagram from Facebook.

Method of disconnecting Facebook from Instagram:

For not having even a single connection between your Instagram account and Facebook you only need to separate both the account with each other. Luckily, this completely removes every connection. With the help of disconnection, you’ll be able to stop posting Facebook pictures to Instagram by itself. The other change that will be made after the disconnection is that shall not get your Facebook friend on Instagram by itself.

Firstly, go to the Instagram app.

Then, visit your Instagram account.

After that, click on Settings. It will look like the structure of the wheel.

Next, move to ‘Privacy and Security’ and press on Linked Accounts.

Observe that if you have linked your Instagram account to your Facebook account, then the color of the Facebook option shall be blue.

Click the linked account.

After that, press Unlink account.

Method of deleting Instagram from Facebook:

After doing the instruction mentioned above one by one, you would have disconnected Facebook from Instagram completely. But for disconnecting Instagram from Facebook, you require to follow the given below instructions carefully.

Firstly, go to facebook.com by your web browser.

Then, select Settings.

After that, click on Applications.

Next, choose Instagram.

Towards the below, click on Remove Applications.

Observe that the ‘Remove Instagram’ option will get displayed if you like to delete every Instagram uploads that have also put on Facebook, the look for Delete all your Instagram actions.

After deciding, click on Remove.

Aida Martin is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup .

More info: norton setup, norton.com/nu16, norton.com/setup, www.norton.com/setup

Top 9 Ways to Fix Apple Watch Not Turning On Issue

Is your Apple Watch is not working at all? Does your Watch fail to turn on? It can happen due to underlying issues. The black display always doesn’t always imply damage. Many of such problems can be rectified quickly. Don’t panic and check out the 9 tricks to make your Apple Watch turn on.

Follow the methods given below to make the Apple Watch work again like it used to.

Make Your Apple Watch Function Smoothly.

1. Reboot Your Smartwatch

Generally, the Watch stops working or the display becomes dark because of the power issue, but it only happens if you were using it throughout the whole day.

In this type of situation, you should conduct a hard reset. Well, this is more convenient because in this busy life waiting for half an hour or more for the smartwatch to get charged will be worthless, if this doesn’t do the trick. The Watch may have been facing this problem because of its software. Or else, you might have accidentally selected a mode that darkened the display. A reboot will make the smartwatch switch off entirely, and then you will be able to switch on your smartwatch. This can solve all the issues except the power one.

● Firstly, hold the side switch which is round in shape and the small button which is situated just underneath the crown.

● Keep holding both of them till the symbol of Apple gets displayed. This means that the Smartwatch is starting again.

● The reboot is done in few seconds but holds both buttons for minimum half a minute before finishing your hard reboot. It is so because in some of the situation it may take half a minute to get done reboot entirely.

2. Charge the Watch

It is worth noting that if your Watch stops working after using it throughout the whole day, then it is the low battery problem. So charging it up is the only solution for it. But if you are facing low battery problem in the mid of the day, then it can be possible that your Smartwatch is not getting charged even when you are putting it on charging.

● Look at the place where you set its charger for charging it up. It can be possible that any plastic is stuck and this obstruction is preventing it from getting it charged.

3. Ensure That Power Reserve Is Switched Off

In Power Reserve, your Apple Watch will only be able to let you know the time. This feature helps your smartwatch to work for more time. No app works in this mode, so smartwatch doesn’t remain smart if this mode is on. So prefer having this mode switched off.

4. Wear Apple Watch Properly

If your Apple Watch is not able to note your activity, then it can be possible that you are not wearing it correctly. It might have become loose. Wear it a bit tight.

5. Update Your Apple Watch

It can be possible that your smartwatch is working very slow. To fix this problem update it.

6. Do The Pairing Again

Some of the times pairings happen but do not work. In such cases, prefer doing unpairing and after that, try to pair once more.

7. Always Clean It

On regular basis prefer cleaning the screen and don’t allow any dust particle to penetrate it.

8. Remove Unnecessary Applications

It can be possible that your smartwatch is not working correctly because there are plenty of applications stored on it. To make your smartwatch work efficiently remove the applications that you don’t use.

9. Avoid Exhaustion Of Battery

The constant exhaustion of battery may influence the Watch’s performance, so try to avoid it as much as possible.

Carl Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Content Source :http://nortoncom-norton.com/blog/top-9-ways-to-fix-apple-watch-not-turning-on-issue/